Posts

Bluetooth and Node-Red

-
Image
Updated 2023-07-12 ! There are some Node-Red nodes, (NRN), that are dependent on the old Noble package which don't work on Node > v8.  One nice and simple NRN is the  node-red-contrib-noble  which have the same problem. I picked up the freshest source, dependent on  @abandonware/noble , forked it and added install instructions. It works with Node <= v18. 
Post a Comment
Read more =>

Teltonika router as security, burglar, alarm !

-
Image
The use case was that we on our yacht have a security alarm which is using 2 G, service terminating during 2024 ?, so it was time to check for some other solution.  Since several years we have used the very nice  Teltonika RUT 240 (TR) onboard which have served us very well. Knowing that this device have both a digital in and out I started to check if it could do the job ??  Googling didn't give any direct clues but the " Input/Output " handling together with " Profiles " changed with a SMS, " Mobile Utilities ", is doing the job. Please note that this setup could be done with any of the routers from Teltonika with I/O !!
Post a Comment
Read more =>

Teltonika router as security, burglar, alarm

-
Image
This post is made for test purposes and issues with Google indexing The "real" post is found  here  !! The use case was that we on our yacht have a security alarm which is using 2 G, service terminating during 2024 ?, so it was time to check for some other solution...........
Post a Comment
Read more =>

Bootable installer for "any" MAC OS, II

-
Image
In a former post I used a nice Python program to get the installers but as you know there are no Python installed in later Mac OS. The program used in this post is the fantastic Open Core Legacy Patcher . (No Python dependencies.) This patcher is made for supporting old Mac:s with new OS:s , which is not officially supported, but here we just use it for getting the USB installer.
Post a Comment
Read more =>

Teltonika router RUT 240 quick setup

-
Image
Updated 2023-06-01 ! My old boat/travel WiFi router didn't behave so I was forced to look for a new one with these  must functions;     Built in SIM 4G/LTE capabilities      WAN failover      Powered with 12V DC      Bridge public WiFi:s, or my phone, to LAN I did a lot of Googling and ended up with Teletonika RUT 240 (TR)..... This post will cover a setup summary for the RUT 240 model, but it's useable for other Teltonika models too since they have a common firmware. Check these posts ! Teltonika router as security, burglar, alarm !                                 Bridged Teltonika router as source for router or mesh network
3 comments
Read more =>

Shelly 1 quick install

-
Image
Updated 2023-05-04 ! This post focus on  Shelly 1 (S1), a really a nice automation device with great versatility, but much of the content is also valid for some of  Shellys other devices  using the gen1 API. Setup for the later version,  Shelly Plus 1 , is found here  !! S1 is a WiFi switch, 16 Amps, with dry contacts and t he function "without Internet" + that the S1 can use a 12V DC source makes it perfect for an "use case" in a  boat /mobile home. It's compatible with Alexa , Google  or HomeKit using HomeBridge  or as a "native" HomeKit device using  Mongoose firmware (Flashed via a standard WEB browser !)
2 comments
Read more =>

Shelly PLUS 1 quick install

-
Image
Updated 2023-05-03 ! In a  former post I made a writing about Shelly 1 (S1) and this post will handle about the successor Shelly PLUS 1 (SP1)  but much of the content is also valid for some of  Shellys other devices  which uses the same software/API. To keep it simple, SP1 is a WiFi switch, 16 Amps, with dry contacts but compared to the S1 the hardware and the software is updated.  The function "without Internet" + that the SP1 can use a 12V DC source makes it perfect for an "use case" i n a boat/mobile home .
2 comments
Read more =>

HomeKit bridge with Shelly/Shelly 1

-
Image
Updated 2023-05-01 ! I really recommend flashing, via WEB-browser, the device with Mongoose software to avoid Homebridge.   HomeBridge is used for this setup and to make it appear in the Apple Home app. The main advantage with the Shelly devices are that they are WiFi enabled and therefore You don't have to use a hub, this compared to z-way/zigbee and some other solutions.  First install Shelly1 (S1).
Post a Comment
Read more =>

Bootable installer for "any" MAC OS

-
Image
Updated 2023-06-11 ! The use case is that I had an old iMac, max OS is High Sierra, that crashed and it didn't work with an Internet or Time Machine restore. The other MAC:s I have are running Catalina or Big Sur and if you try to download and older OS , via app-store, you just get an error saying that the running OS don't accept the download of an old OS. The universal way to create an USB installer seems to be using the command " createinstallmedia ", requires OS X 10.7 Lion or later, but you need the respective OS install app ! A new, better ??, without Python dependences is found here .
Post a Comment
Read more =>

Popular posts, last 30 days

Raspberry Pi OS Lite with GUI, RDP, VNC, Chromium

-
Image
Updated 2025-10-02 ! I like the Raspberry Pi(RPi), with Raspberry Pi OS Lite (no Desktop is included), headless operation, and then adding the software You need. Until now I haven't had a use case where I needed a Desktop but now was time.  Why don't use the Raspberry Pi OS with Desktop ?? In that package there is a lot of software I don't need and I really want to optimize the RPi. I think that the less software You install the happier RPi will be... 😉
Read more =>

iCloud drive sync, or mount, with a Linux, Ubuntu, device

-
Image
Updated 2025-01-23 ! With my project to keep a MacBook Air 2011(MBA) alive , Ubuntu installed, i searched for a solution where my iCloud drive(iCD) was  continuous synced with my MBA. This must work both ways so even a file change made on MBA should be replicated to iCD. rclone now, 2025-01, works with iCloud !! Setup below !! Before "rclone" was working with iCloud I solved my sync between iCD and MBA with Syncthing (ST). Check below. ST doesn't sync with iCloud so the work around here was to use my MacMini, Mac OS, as the "Middle man". It's always on and synced with iCD.
Read more =>

Installing Ubuntu 24.04 or 24.10/25.04 on an old MacBook Air(2011)

-
Image
Updated 2025-05-20 ! I have done several posts Blogging about how to keep an old MacBook Air(MBA), mid 2011(A1369), with SSD disk "alive". I have used the fantastic software package OpenCore Legacy patcher to upgrade the Mac to the latest Mac OS.  A while ago i tested Mac OS  Sequoia (15.3), on the mentioned Mac, but I had to admit that it was to much for the 14 year old companion. I really like the Mac and everything works, after a battery change , so it ended up with installing  Ubuntu 24.04.2 LTS  or if you want the latest scroll down and get Ubuntu 24.10/25.04. Ubuntu on  Mac Mini (2018) and MacBookAir (2010)  ?
Read more =>

IVT, Bosch heat pump easy integration, Home Assistant

-
Image
Updated 2025-10-16 ! In search of the optimal solution on how to interface our IVT Heat pump,   first try here , I stumbled over   a nice integration   for Home Assistant(HA). A first quick setup is shown at the right. The first obstacle was that it was HA which I knew about but never used.  So it was "back too school" and doing  a blog post  about a HA Core install.
Read more =>

Home Assistant with VirtualBox or Proxmox or Linux KVM ???

-
Image
After testing Home Assistant (HA) for a while, I’ve realised it could improve my home automation, despite that I'm using Apple HomeKit. When I tested HA with Node-RED and some other "Add-ons", on a Raspberry Pi 3 (RPi), I found that its resources wasn’t enough. The following setup could be any computer but I recently bought an Apple Mac Mini M4, replacing my 2018 (M18) model, so the M18 was really a great candidate for my HA setup. The preferred method running HA is through the  HA Operating System (HAOS), which makes your "life" easier. 😉
Read more =>

Clone the Raspberry boot disk

-
Image
Updated 2024-02-20 ! A very nice way to fix a backup is to make a copy, bootable, of the actual SD card You are using on the Raspberry Pi(RPi). This will be done even when the RPi is up and running ! This application can also be used to make a bootable SSD or USB drive !! You clone from the command line so You don't need the standard GUI, Pixel, and the " SD card copier "  function. It is also possible to set up a a scheduled job, cronjob explained later, which for example makes a clone every night at 1 o'clock.
Read more =>

Raspberry Pi 2, 3, 4, 5 USB SSD or USB drive boot

-
Image
Updated 2024-06-06 ! After having tested several methods creating a bootable USB SSD, or other USB drive, for Raspberry Pi(RPi) 3 4 and 5, I finished with this simple method Create the setup you want on a ordinary SD card(Or use existing) Make a bootable backup/clone of the SD card saving it to the USB SSD Remove the SD card and boot from the USB SSD Having a RPi 4, 5 ? Use this post on how to write the OS direct to the SSD.  
Read more =>

NetworkManager UI and access point, hotspot

-
Image
Updated 2023-10-12 ! In a former post I shared some thoughts about how to start using NetworkManager (NM), on a Raspberry, and here I will continue with additional examples that can help with network setup. NMTUI is NetworkManager text UI which can handle the most common tasks in a easy way. An access point or hotspot will be configured. " sudo nmcli connection edit xxxx " is a command that guides you throw a change of parameters.
Read more =>

SeaTalk1 to NMEA 0183 converter, DIY

-
Image
Updated 2024-08-30 !  !! Another SW solution is available for RPi 5 here !  using the same HW. Thanks to Thomas, (the guy with the nice marine interface board ) ,  it's now possible  to decode, one way, the SeaTalk1(ST1) sentences in a pretty simple way. You just  use OpenPlotter(OP) and/or SignalK(SK) and an  Optocoupler . The thing that made it, is that Thomas   has released a "how to" and  Python source code , that will read the data from a GPIO pin on the Raspberry Pi, (RPi), and format it so the standard parser in SignalK can translate it to SignalK delta format. It is then  available as NMEA 0183. It's even possible to send the data in to a NMEA 2000 network, with a proper hardware interface.
Read more =>

IKEA Bäve dimmer hack II

-
Image
Updated 2025-01-10 ! Dimming not dimmable LED, IKEA Bäve, produced before 2019-11 and a new idea for later products ! In former post I used a  Fibaro Z-Wave RGBW controller  but in this post I will use an IKEA original or an external dimmer ?!
Read more =>