Updated 2024-08-30 !  !! Another SW solution is available for RPi 5 here !  using the same HW. Thanks to Thomas, (the guy ...

Updated 2024-07-08 To get information from the NMEA 2000(N2K) network, to the RPi, I have been using  Actisense NGT-1 , for a long time,  an...

Updated 2024-05-03 ! In Signal K (SK) there are 2 applications, in SK appstore, that can handle charts ...

Updated 2024-03-01 ! OpenPlotter(OP), a Boat Navigation application, is really a nice and simple installation of OpenPlotter (OP) OpenCPN (O...

Updated 2023-12-01 ! I have got some questions installing, just,  Signal K (SK) so will do a summary, on a Raspberry Pi, with links....

Updated 2023-11-06 ! I have searched for a solution transmitting the NMEA dat...

Updated 2023-11-05 ! An introduction to the SignalK, Marine application, is given here . A very easy way to measure temperature with Ra...

Updated 2023-10-16 ! This post is the second post explaining the purpose with, and quick/simple install instructions for, OpenP...

Updated 2023-10-15 ! This post, a dditional posts will follow,  will explain the purpose with, and quick/simple install instructions...

Updated 2023-01-20 ! Our boat was delivered, 2006, with just Raymarine equipment using network Seatalk 1(ST1), and some NMEA0183(N1). Updat...

In former posts   I used the temperatur sensor DS18B20, in several applications, but now it was time for the boats exhaust temperature and c...

This post is written for those who runs Signal K(SK), or applications that indirect are using SK, and want to write log files that could be ...

Updated 2021-07-24 ! Many newer MFD:s don't have any  NMEA 0183(N1) connector. The   Axiom don't even have any Seatalk NG connector ...

Updated 2021-06-15 It's always nice to have ALL information at the same place, navigator/plotter, when You are out with the boat.  W...

Updated 2021-03-13 ! Here I'm trying to do the "ultimate" SignalK switch blog post including( no N2K) Shelly 1 as the hardware...

I'm always a little confused that as soon as someone wants to get an analog measure to a Raspberry Pi(RPi) they are often taking ...

Do you know about the SignalK workspace at Slack ? It's a really nice space where you could meet the developers and ...

Are You searching for a solution where You want to create graphs and gauges from SignalK(SK) data ? Use NodeRed...

An introduction to the SignalK(SK), Marine application, is given  here . A very easy way to measure temperatures with SK is to use one wire ...

A  newer post  on the same subject !! If You want to capture Your data from a sailing trip there are several ways. Here I will check out th...