Posts

Showing posts with the label Looks

Raspberry LCD displays

Image
There are many displays for Raspberry Pi  and  following some of the manufacturers instructions isn't always so easy. But there are scripts available which will make it very simple. As an example, in this post, I will install the LCD touch display from Joy-IT RB-TFT3.2-V2. The size is 3,2" with a resolution of 320 x 240, has a touch display and comes with 3 buttons.

Reclosable Fastener, Velcro

Image
I think there is many people like me that don't like to make new holes in their boat, so 3M have made a fantastic solution, Dual Lock, that in many use cases solves the problem. Its a type of Velcro but there is no male/female part. Both parts are same Many of the interior panels in our boat is attached with this fastener. One application was that we wanted to hang the nice George Jensen gauges on the bulkhead/wall but, as said, didn't want to make any new screw holes. The solution was to make a mahogany plate with the screws and then attach the plate with Dual lock to the wall. In order to have the plate close to the wall a cavity was made on the backside of the plate. The cavity was made with a router.

Creating HTML mail, Mac

Creating fancy HTML mail with Mac Sometimes You really want to send out a fancy mail that hopefully receives by different operative systems and hardware in a similar way. Start with editing Your source in Your favourite editor, could be MS Word, and then save it as WEB page/HTML.  Then right click on it and open it with Safari.  In Safari, File - Share - Mail contents of this page. This opens up Mac Mail.  In Mac Mail be sure  "Send Web Content" is set to "Web Page" Enter the recipients and click Send In Word it is simple to edit pictures and even add weblinks to pictures and text. This editing will "transfered" all the way to the mail.

Refurbish nameplates

Image
Refurbish the Storebro Commander nameplates. The nameplates are manufactured by using a router, carving out the characters/lines, and then the entire plate is painted with a white paint. After that they are sanded so that the white colour only remains in the characters/lines and then afterwards the plate is  finished with several coats of clear varnish. The  problem is that the sharp edge between the characters and the surface makes that the varnish doesn't becomes thick enough,  because of the surface tension . After some years the varnish cracks, at the sharp edges, and the moist raises the varnish and  You have a problem.

Soap dispenser

Image
Swap from toothbrush holder to soap dispenser We really missed soap dispensers, in both toilets, when we bought the boat and thought that a tooth brush holder, mounted at delivery, isn't mandatory. So after some investigation we found the Smedbo HK370 which solved the problem and also cover the old holes for the tooth brush holder.

Berker outlet lid

Image
Improving the looks with a lid The boat is equipped with Berker Minikombi outlets/switches. These are not sold anymore but the series Berker Integro Flow fits. So to improve the looks at the helm I purchased a Berker lid with hinge to cover the 12V outlet. Much better looking, right ?

USB charger

Image
The boat is equipped with Berker switches and sockets. In the master cabin the outlets in the picture are placed at the end of the bed so its a god place to charge a mobile phone. You could use a charger with the cigarett socket but its nicer with a USB outlet One way is to use the original Berker but it is both pretty expensive, just outputs 1 Ampere and have only one output. Link to one supplier, SVB