Pyssel

Updated 2021-02-23 ! A  newer post  in the same subject !! For Openplotter V2 check here To test Openplotter, (OP), together with OpenCPN,(OC), without connecting to the navigation network on board there are two features  Using the NMEA generators, found in the OP "Tools" menu  Use log files which are stored within the SignalK application.

Updated 2018-02-14 ! This backup method will make a copy/image of the whole card even if there is very little data on it. So if the card is 16Gb, the backup file also will be 16Gb. On the other hand You can ZIP the image file to save space. Another, maybe smarter ?,  backup method is described here .

Updated 2017-08-25 ! If You have a Private Weather Station(PWS) and would like to have a good view over the data and, as an add on, also forecasts from Weather Underground  (WU) this free software probably solves Your problem. Despite that the project is terminated the code is available and instructions is available at my other posts https://weather34.com/homeweatherstation/

The 27" Thunderbolt Display, part number A1407, is connected to my MacBook Air and sometimes the display is going black. After some Googling I found that other people have had the same problem and the issue is that the Thunderbolt cable is defect. The thing is always to get the right spare part number which is 922-9941 So search with Google or Bing => "Apple cable 922-9941" Some hints to exchange the cable is to follow the relevant parts of these instructions on IFIXIT I bought suctions cups from Biltema  to lift the the glas screen which is attached with magnets

Have You ever felt lost, coming out from a shopping mall and just wondering; Where the heck did I leave my car ??? If Your iPhone is connected to Your car with Bluetooth the problem is solved. Apple have had a brainstorming so just follow the advice in this support information. How to find your parked car with Maps on your iPhone and You are all safe.

If You activated  Two Factor Authentication , 2FA, on Your devices it could be that Your old Apple TV 2 or 3 after some time wants to be in the same "club". Two weeks after I activated 2FA for my other devices, my ATV 2 demanded the code for 2FA?? I tried to log on to the ATV2 with my iCloud password but didn't succeed. In the same article mentioned above, there is info for devices running older software. "Then type your password followed by the six-digit verification code directly into the password field."

A well-made compilation about homekit. The Wirecutter Other  HomeKit posts  on this Blogg

Since the HomeKit app, Home, for iOS was shipped with iOS 10 it was time to check its possibilities. After some checking the products from Elgatos Eve  seemed to be a way to start. They also have a free App which I like. The disadvantage is that they are Bluetooth devices with a limited range and therefore have to be pretty close to an Apple TV. I started up with the Eve Room, indoor sensor, and Eve Energy, switch and power meter, and the Apple TV 4 as Home hub. Apple have god instructions here and t here , read them, but first update the firmware of the accessories, in this case via the Elgato Eve app, otherwise the Home app will probably not recognise them.

The big thing is that if You follow the setup on the Apple link below You can limit the access to Your Apple account to only trusted devices. So even if a Hacker have both Your Apple ID and password it is not enough to access Your account. Two-factor authentication for Apple ID