Pyssel

My thoughts, about NMEA WiFi have finalized ? since my first post in the subject  and the Yacht Devices YDWG-02N is now installed in my NMEA2000/ST/NMEA0183 network and works just fine.  I'm already using Raymarine ST => ST NG converter but otherwise I had bought the YDNR-02  instead which should have done the same job. Please find some thoughts from the installation below.

Updated 2019-05-11 ! My old Mac Book Air, mid 2011, didn't support the latest MacOS, Mojave. So after some checking I found this brilliant fix  which did the job. This guy have really done a fantastic job with great instructions and even a Youtube video .

Running Weather 34, W34, using my setup , the program " cumulusdata.php " is fetching data from Davis Weatherlink(WL), and are writing the data to a file, type Cumulus. The old way was to fetch the data via a scheduled cronjob.  Doing a small change to " windspeeddirection.php ",  " updater.php "  , and using  the latest version of  " cumulusdata.php ",  will do the update with the built in W34 refresh routine instead of cron job. Thanks to Ken who gave me the hint.

Updated 2019-03-18 ! Do You have Telldus devices up and running and want them to be visible and used in Apples Home app ? With some software and a Raspberry Pi(RPi)  they will appear in the HomeKit environment. Other  HomeKit posts  on this Blogg

Dimming not dimmable LED, IKEA Bäve Inspired by LarsWH and using a Z-Wave controller I got it working  with a "standard" component. Other  HomeKit posts        on this Blogg         A new version !!  With an  IKEA controller and HomeKit enabled is  available here  !!

I bought the Gledopto RGB+CCT LED controller (GO), so I could use RGB LED strips, not just the IKEA ones. There were some IF:s, which will be scrutinized below, but it worked. Other  HomeKit posts  on this Blogg

Updated 2019-01-07  !! Note !! Before Monterey !!  As a part of one of my projects,  the ultimate Weather site ?? Weather34 (W34), I needed a WEB-host with PHP and started to use a Raspberry Pi . In this post You will get some short install tips on Apache with PHP on a Mac with Mojave, macOS 10.14.x, and a t the end of the post the W34 installation is done.

Updated 2019-09-02 ! If you think it's ok that the broadband speed appears as temperature in Home apps  this plugin is very nice. The plugin, used with Homebridge (HB), measures Your broadband speed at chosen intervals. If You use the free app " Eve for Homekit ", besides that it shows the last measured broad band speed,  it also shows the speed history in a nice graph. Other  HomeKit posts  on this Blogg

Updated 2019-04-01 ! Prerequisites is listed in the beginning of the post for installation on  Raspberry Pi(RPi) You will find migration information, from WeatherLink 1.0 to WeatherLink 2.0, in this post