SignalK, measuring temperature II

An introduction to the SignalK(SK), Marine application, is given here.

A very easy way to measure temperatures with SK is to use one wire (1W) DS18B20 (DS)temperature sensors. 

In a former post the DS:s where connected direkt to the RPi GPIO:s, but in this post they are WiFi enabled via the Shelly 1(S1). Alarms are also sent when the temperature exceeds a set value.

If humidity is of interest You can use a  DHT22 sensor instead of a DS sensor.

OpenPlotter V2, NMEA or SignalK data TO file

A newer post on the same subject !!

If You want to capture Your data from a sailing trip there are several ways. Here I will check out these

• SignalK delta, via plugin signalk-data-logger 
• NMEA 0183(N1), via netcat
• NMEA 2000(N2), via actisense-serial

If you then want to use these files as input for OpenPlotter, OpenCPN or SignalK check out this post.

OpenPlotter V2, NMEA or SignalK data FROM file

A newer post on the same subject !!

The easiest way to test Your OpenPlotter, OpenCPN or SignalK(SK) applications is to use the supplied sample files in SK.

Another way is to capture Your own data from a sailing trip, which is described here. Then You can use them instead of the supplied sample files.

OpenPlotter, V1, quick install guide

Updated 2020-01-13 !

OpenPlotter is;

• A complete boat navigation system
• Includes OpenCPN, Chart plotter navigation
• OpenSource, so it's free !
• Running on Raspberry Pi(RPi)
• Its hardware is cheap
• Running on Unix, so its reliable

I really don't recommend this old OP 1, instead check out OP V2, stable, which works very well ! 

OpenPlotter, updating SignalK Node server

Updated 2018-06-07!

The SignalK server(SK), the engine in OpenPlotter(OP) is coming with new releases pretty often and if You want to update, having used OpenPlotter RPI V0.10.0 NOOBS, the following instructions will help You.

I really recommend to start all over with a new fresh installation with the new OP V1.x.x.

Boat navigation network

In a former post a I presented our approach to mix a modern NMEA 2000(N2) network with the older Raymarine ST 1 network, installed 2006.

During the Years it has grown and been added with new functions. The pictures to the right is the actual layout.

The first add on was a N2 GPS described here.

OpenPlotter V1, NMEA data TO file

Updated 2021-12-14

A newer post in the same subject !!

Sometimes You want to "take home" Your latest trip on sea and "replay" it or replay it doing some changes in the settings for the OpenPlotter or OpenCPN applikation and se the result direct.

One way is to create log files with the the "raw" NMEA data and then use them at home with tips from this post.

Creating log files from NMEA 2000 bus, N2K, is the most straightforward.

OpenPlotter V1, USB sensors install

Updated 2018-06-26!

If You started with my quick instal guide You are a little familiar with OpenPlotter, (OP), basics and now we proceed with the sensors. Don't forget to delete the RMC sentence from the "NMEA 0183 generator" which we used.

Link to a stand alone AIS receiver.

Not valid for OP Beta V2 !!  Check here !

OpenPlotter V1, NMEA data FROM file

Updated 2021-02-23 !

A newer post in the same subject !!

For Openplotter V2 check here

To test Openplotter, (OP), together with OpenCPN,(OC), without connecting to the navigation network on board there are two features 

• Using the NMEA generators, found in the OP "Tools" menu 
• Use log files which are stored within the SignalK application.

Network diagrams

Network diagrams Seatalk 1, Seatalk HS, NMEA0183, NMEA2000

To get en idea how the network is configured please find the links below

The diagrams are divided into a Raymarine part, Seatalk/NMEA0183, and a Garmin part, NMEA2000

The respective diagram is vertically divided in 3 parts depending on location.
Helm, tecnical storage room and flying bridge

Boat network ST1, NMEA0183, ST HS

Boat network NMEA2000