HomeKit bridge with Ring

With HomeBridge installed on a Raspberry Pi, (RPi), You just install the homebridge-ring plugin and the Ring accessories will appear in Apple HomeKit

This post will cover the Ring video doorbell but is a guide for other Ring products.

Prerequisites

• Homebridge
• Ring doorbell
• Ring account

Razberry backup and restore

There are two ways to take a backup of Your Raspberry Pi:s, (RPi) Razberry(RZ) configuration;

• Clone the Raspberry boot disk
• Backup just the Razberry configuration

The first way is a described in this post and here we will use the built in function in the Razberry GUI

HomeKit bridge with IKEA Trådfri, Blinds

         Updated 2019-09-20 !

This Blogpost was initially made before the IKEA outlets was enabled in the Apple Home app. They could then just be reached via a Tradfri Homebridge plugin. 

Since a while blinds are supported by this plugin but not by the IKEA Gateway and app so maybe its time again to install it ?

Another post covers the installation of the Trådfri gateway with a HomeKit approach. (Without Homebridge)

Other HomeKit posts on this Blogg

HomeKit bridge with Z-Wave II

In a former post I used Homebridge on a Raspberry Pi, to make Z-wave devices appear in the Apple Home app, but there is a simpler and faster, way.

Start with the install of the Razberry card or upgrade to Z-way V3.0.0

Other HomeKit posts on this Blogg

HomeKit bridge with Telldus Live

Updated 2019-03-18 !

Do You have Telldus devices up and running and want them to be visible and used in Apples Home app ?

With some software and a Raspberry Pi(RPi) they will appear in the HomeKit environment.

Other HomeKit posts on this Blogg

IKEA Bäve dimmer hack

Dimming not dimmable LED, IKEA Bäve

Inspired by LarsWH and using a Z-Wave controller I got it working with a "standard" component.

Other HomeKit posts 
     on this Blogg        

A new version !! With an IKEA controller and HomeKit enabled is available here !!

HomeKit, Trådfri and Gledopto RGB

I bought the Gledopto RGB+CCT LED controller(GO), so I could use RGB LED strips, not just the IKEA ones.

There were some IF:s, which will be scrutinized below, but it worked.

Other HomeKit posts on this Blogg

Homekit with broadband speed measure

Updated 2019-09-02 !

If you think it's ok that the broadband speed appears as temperature in Home apps this plugin is very nice.

The plugin, used with Homebridge(HB), measures Your broadband speed at chosen intervals. If You use the free app "Eve for Homekit", besides that it shows the last measured broad band speed, it also shows the speed history in a nice graph.

Other HomeKit posts on this Blogg

IKEA Trådfri gateway install & HomeKit

Updated 2019-02-05 !

Using Homebridge for a while, getting nice hardware to emulate Apples HomeKit devices, I finally decided to test IKEA:s Trådfri concept.


The actual device that I was interested in is the wireless control outlet. But they have bulbs and other stuff that is really nice priced.



This post will cover an installation of the Trådfri gateway with a HomeKit approach.  


Other HomeKit posts on this Blogg

Qubino flush dimmer 1-10 V

We bought a nice LED lamp, Nemo Ellisse Pendant Double, which was said to be dimmable, but when receiving it there was a big IF  !!! 

The lamp was not "standard" dimmable, instead it was dimmable with 1-10 VDC or 100 Kohm potentiometer.

The 1-10 VDC control is common in big installations, in public environment, since it can control a lot of lamps with one dimmer.

Checking the lamp I found that the AC/DC LED driver was a Mean Well LPF-90D and in the drivers specification the second IF was found !!

The lowest control level didn't switch of the lamp

HomeKit explained

A well-made compilation about homekit.

The Wirecutter


Other HomeKit posts on this Blogg

Unboxing EVE HomeKit products

Since the HomeKit app, Home, for iOS was shipped with iOS 10 it was time to check its possibilities.

After some checking the products from Elgatos Eve seemed to be a way to start. They also have a free App which I like. The disadvantage is that they are Bluetooth devices with a limited range and therefore have to be pretty close to an Apple TV.

I started up with the Eve Room, indoor sensor, and Eve Energy, switch and power meter, and the Apple TV 4 as Home hub.

Apple have god instructions here and there, read them, but first update the firmware of the accessories, in this case via the Elgato Eve app, otherwise the Home app will probably not recognise them.