Home Assistant and Node-RED .........

Please note that this post is a copy of the post from 6 April and is just created due to problem with Google indexing !!! 

Node-Red(NR) is Flow-based programming for the Internet of Things.

I have in the past written a lot of posts for Node-RED and the HA implementation makes it easy to interact with HA:s entities.

The best thing is that even if you don't are a skilled programmer, but like logic flows, you can make really advanced things and it really complements the logic that could be made within Home Assistant(HA).

In this post a will do a quick introduction to what is possible with NR together with HA.

Remote access for Linux, remote.it, made simple

Updated 2025-03-23 !

Sometimes it's really nice to reach your applications, secure and quick, at home when you are somewhere else. 

There are several applications but this post will be describe a really quick setup with remote.it on a Raspberry Pi(RPi) or another Linux platform. Of course there also is a Windows version.

The most used services are; http, ssh, vnc, rdp, SAMBA(smb/cifs) ..... and or non-commercial use, with up to 5 devices, it's free !

I'm using it to access Home Assistant, display NodeRed dashboard, access servers with "ssh" and file sharing with SAMBA there all applications are running on RPi:s at home.

Home Assistant for beginners or easy start

Updated 2025-03-14 !

What is the purpose of a Home Assistant(HA) according to Wikipedia ?

Home Assistant is free and open-source software used for home automation. It serves as an integration platform and smart home hub, allowing users to control smart home devices. The software emphasizes local control and privacy and is designed to be independent of any specific Internet of Things (IoT) ecosystem. 

Even for me, as someone running Apple HomeKit and Homebridge, it is a fantastic piece of software that bridges almost everything and enables highly intelligent integrations. 

Since it is widely used, there is a wealth of information available. However, I couldn't find a clear "bullet list" on how to get started. This post will primarily contain links to other sources rather than writing extensive explanations myself.

Home Assistant core install, Raspberry Pi and Python 3.12 & 3.13

Updated 2025-02-20 !

The best way to start with Home Assistant(HA), and Raspberry Pi(RPi), is off course to use the ”Raspberry Pi imager” and in the menu select "Other specific-purpose OS => Home Assistant and home automation => Home Assistant". This will install the HA operating system.

It works very well and here are the install instructions. 
On the other hand if you want to add HA to a RPi which you already have up and running, without Docker, you need to install something which is called "Home Assistant Core".

Please check the "Remarks" below before you start.

New version for Python 3.13 ! Below info is not updated but just change from 3.12 to 3.13 

iCloud drive sync, or mount, with a Linux, Ubuntu, device

Updated 2025-01-23 !

With my project to keep a MacBook Air 2011(MBA) alive, Ubuntu installed, i searched for a solution where my iCoud drive(iCD) was continuous synced with my MBA. This must work both ways so even a file change made on MBA should be replicated to iCD.

rclone now, 2025-01, works with iCloud !! Setup below !!

Before "rclone" was working with iCloud I solved my sync between iCD and MBA with Syncthing(ST). Check below. ST doesn't sync with iCloud so the work around here was to use my MacMini, Mac OS, as the "Middle man". It's always on and synced with iCD.

IKEA Bäve dimmer hack II

Updated 2025-01-10 !

Dimming not dimmable LED, IKEA Bäve, produced before 2019-11 and a new idea for later products !

In former post I used a Fibaro Z-Wave RGBW controller but in this post I will use an IKEA original or an external dimmer ?!

Install Weather34 with WeatherLink

Updated 2025-01-09 PHP 8.2 !

If You want Your Private Weather Station(PWS) Davis Vantage Pro2, or other Davis products that use WeatherLink, to provide data for the template we use at Domstens Båtklubb just follow the instructions below. 

This is made without additional software such as Cumulus, Weather display or the Meteobridge product.

This application is updated !!, to use the v2 API. Check  this post !!

Install Weather34 with WeatherLink, v2 API

Updated 2025-01-08 OK PHP 8.2 !

This post is an update from a former post which handles on how to set up a weather WEB-site with data from Davis Weather Link(WL) but here adapted to the latest WL API v2.

Any product that reports weather data to WL can be used as a source for this weather template.

This is made without additional software such as Cumulus, Weather display or the Meteobridge product.

DMI forecast API for atmosphere, ocean and sea ice, free !

Updated 2025-01-04

DMI is the Danish Meteorological Institute and the Open Data API provides free and open access to DMI’s data.They are covering a pretty big area not just Denmark.

I'm maintaining the weather station for Domstens yacht club and have become really interested in weather "issues".

The actual use case for me is that I have to change the mooring, of our boat, if the water level exceeds 60 cm from normal. For several years I have been searching for a free forecast API so I can get an early warning when the water level rises.

Node-Red is used.

ReSound Smart 3D app for ReSound hearing aids

Beeing forced to use a hearing aid(HA) is not that fun but on the other hand it's always exciting with new electronic gadgets and to better participate in conversations with other people. 

In this post I will just summarize some points gathered when setting up the HA with the ReSound Smart 3D(S3D) in an Apple enviroment. But of course there is also a Android app

These hearing aids are compatible with the mentioned app and I'm using Resound Nexia 9 RIE.
 

Raspberry Pi OS install with Mac/Windows/Linux

Updated 2024-12-13 !

When starting up a new project with Raspberry Pi I like to start up fresh and with a minimal OS. Therefore i always use Raspberry Pi OS(ROS) Lite and then adding what I need. 

Doing it right You don't have to use an external display, keybord and mouse, just a "ssh" client.

Flash to a SSD ? Check this post.

Receive temperature, 433 MHz sensors, with RTL-SDR

 

Updated 2024-12-01 !

In my underfloor heating project, using Node-RED, I have to have one sensing thermometer per room/zone, seems to be 8 in total, so therefore it would be nice with a wireless battery sourced device with good resolution and frequent updates.

During the test phase I used a Z-way device but the resolution was pretty bad. Another device mentioned is the Ruuvi tag but since it's a bluetooth device the transmitting range could be better.

After some googling I went for 433 MHz devices.

Underfloor heating with PID controller, Node-RED

Updated 2024-11-14 !

In a former post I did some hacking/checking how our underfloor heating control system handled the valves, actuators, regulating the heat. 

Now it was time to do some tests with Node-RED(NR), with a PID controller, and a Shelly 1(S1) connected via WiFi and driving the actuator.

The actuators are in my case controlled by 24 VAC and the S1 accepts 110 - 240 VAC, 24 - 60 VDC and 12 VDC. So in this case it was simple to just add a rectifier and a capacitor, to the 24 VAC, to get approx 36 VDC to source the S1.

Matter bridge, with Shelly, or non Matter devices

Matter is a smart home standard currently being developed by a consortium of over two hundred companies, including big players such as Apple, Google, Phillips, Amazon and Samsung.

Many new devices have Matter implemented, from the beginning, but devices, such as most of Shelly devices don't. On the other hand many hubs can be upgraded to Matter support. For example an Apple TV.

With a Matter bridge you can solve the incompability. This post will use Matter bridge plugin Manager and the Shelly plugin but it could be other devices shown in the picture below.

CTC heatpump MODBUS interface

Updated 2024-11-14 !

The installation of a CTC heat pump(HP), EcoAir 600, and the indoor module, Eco Zenith i360, was not optimal from the beginning, so to monitor it closely I checked how to retrieve data. 

The newer CTC HP:s are always shipped with a MODBUS TCP interface, without any additional hardware, which solved the issue.

MODBUS was new to me but after some reading and checking I found that there is a NodeRed node which solves the interface dialog.

MODBUS RTU gateway, WiFi, Ethernet, WEB server

In my project to get data from the Swegon Casa HRV, FTX, i needed a new solution to distribute the MODBUS data from the CASA.

The thing is that I have a Raspberry Pi(RPi) that is the central HUB for everything going on in our house, but away from the CASA, and the data is there vizualized in a NodeRed dashboard.

Since the CASA RTU is serial, using Waveshare USB to RS 485, and I didn't want to install a new long cabel to the central RPi I used another RPi which is near the CASA.

Shelly devices as "native" Apple HomeKit accessories

Updated 2024-11-09

I have been using Shelly devices for quite some time both on our boat, off grid, and also as HomeKit (HK) accessories via Homebridge (HB). 

I was really amazed when I found that some smart guys have created a software package that replaces the stock, official, Shelly firmware with the "Shelly-HomeKit" package which emulates a "native" Apple HomeKit accessory.

It's very nice done, really simple, and the flashing of the software is done over the air (OTA) with your ordinary WEB-browser.

Node-Red quick install

Updated 2024-11-06 !

Node-Red(NR) is Flow-based programming for the Internet of Things

This post isn't made as a complete install guide, there are several, just some links to the best information I have found.

The best thing is that even if you don't are a skilled programmer, but like logic flows, you can make really advanced things. It's pre-installed on some Raspberry Pi(RPi) distributions.

Running Node-Red with multiple instances ?

Swegon CASA, HRV (FTX), rotary heat exchanger and MODBUS

Fresh air at home is very important ! For more than 15 years ago, at a major renovation of our house, we installed an HRV or in Swedish FTX system. Since then there have been nice updates for FTX equipment so when one of the fans was a little noicy and when the motor for the rotor died it was time to do an upgrade instead of repairing the old one. So we purchased an CASA R7 Genius(R7).

For me its important to get as much data as possible, to optimize energy consumption in our house, so despite that the the R7 have a nice app we also added a SEM interface to get the data, via MODBUS, that is available.

AIS receiver and dispatcher ! The best ?!

Updated 2024-10-25

I found this amazing application, AIS-catcher, just scrolling around on Youtube and it includes "all" you need for an AIS receiver staying ashore or installed on a boat.

It is compatible with a wide range of Software Defined Radios (SDRs). These include RTL-SDR dongles (such as the ShipXplorer AIS dongle and RTL SDR Blog v4), AirSpy (Mini/R2/HF+), HackRF, SDRPlay, SoapySDR, and file/network input (ZMQ/RTL-TCP/SpyServer). 

Ubuntu Desktop for beginners or easy start !

This post is for both Windows and Mac users ! 

I have been running Linux, Raspberry Pi OS, since several years but almost just the Lite version (without Desktop).

But when my old MacBook Air "gave up", with Mac OS, it came naturally to use Ubuntu Desktop since it's also based on the Debian Linux distribution and the most used Linux distribution.

So it ended up with installing Ubuntu 24.04.1 LTS(UOS) or the later 24.10 !

SeaTalk1 to NMEA 0183 converter, DIY

Updated 2024-08-30 ! 

!! Another SW solution is available for RPi 5 here ! using the same HW.

Thanks to Thomas, (the guy with the nice marine interface board), it's now possible to decode, one way, the SeaTalk1(ST1) sentences in a pretty simple way. You just use OpenPlotter(OP) and/or SignalK(SK) and an Optocoupler.

The thing that made it, is that Thomas has released a "how to" and Python source code, that will read the data from a GPIO pin on the Raspberry Pi, (RPi), and format it so the standard parser in SignalK can translate it to SignalK delta format. It is then available as NMEA 0183. It's even possible to send the data in to a NMEA 2000 network, with a proper hardware interface.

LK System, Floor heating

Updated 2024-08-15 !

Do You use a floor heating system from LK Systems ?

We had a problem that in some rooms, despite that the thermostat worked, the temperature was too high.

To check if it was the valve, or something else, I just took away the actuator and forced the valve to be closed. Cable ties did the work.

The valve was OK so what was the problem ?

Building your own floor heating controller,  PID controller ? 

Waveshare CAN hat with Signal K & OpenPlotter

Updated 2024-07-08

To get information from the NMEA 2000(N2K) network, to the RPi, I have been using Actisense NGT-1, for a long time, and later also the Yacht Devices YDWG 02 but now it was time for a Raspberry Pi(RPi) CAN hat(CH) from Waveshare(WS). WS have 3 different models but I picked the 2 channel isolated one.

It's recommended to use an isolated one which also is demanded for those interfaces which can be approved by the N2K group.

Raspberry Pi OS Lite with GUI, RDP, VNC, Chromium

Updated 2024-07-01 !

I like the Raspberry Pi(RPi), with Raspberry Pi OS Lite (no Desktop is included), headless operation, and then adding the software You need. Until now I haven't had a use case where I needed a Desktop but now was time. 

Why don't use the Raspberry Pi OS with Desktop ?? In that package there is a lot of software I don't need and I really want to optimize the RPi. I think that the less software You install the happier RPi will be...

😉